1. Sverige
  2. Alla 3M-produkter
  3. Tejper
  4. Foamtejper
  5. Akrylfoamtejper
  6. 3M™ Acrylic Plus Tape PT1500, black, 1.52 mm, 9 mm x 66 m

3M™ Acrylic Plus Tape PT1500, black, 1.52 mm, 9 mm x 66 m

  • 3M ID 7100075090

Proven adhesion performance to automotive paint surfaces, including the newest scratch- and mar-resistant formulations

Highly conformable core, which improves adhesive wet out, combines with high performance adhesive systems to provide excellent part adhesion to the most challenging surfaces

Non liner-side adhesive delivers excellent adhesion to metal and primed plastic parts

Visa fler detaljer

Detaljer

Höjdpunkter
  • Proven adhesion performance to automotive paint surfaces, including the newest scratch- and mar-resistant formulations
  • Highly conformable core, which improves adhesive wet out, combines with high performance adhesive systems to provide excellent part adhesion to the most challenging surfaces
  • Non liner-side adhesive delivers excellent adhesion to metal and primed plastic parts
  • Liner-side adhesive is designed for traditional, medium surface energy and mar-resistant automotive paint systems
  • Conformable closed cell acrylic foam core delivers good stress relaxation under load
  • Adhesion promoter recommended for tape-to-part adhesion on plastic parts
  • Dark Grey color provides good bond-line appearance

3M™ Acrylic Plus Tape PT1500 features two adhesives, one on each side of a viscoelastic acrylic foam core, designed for robust performance even on complex contours and difficult automotive paint surfaces. The unique foam core provides stress relaxation when exposed to high application loads, while maintaining tight bond-line aesthetics under normal conditions.

3M Scotch-Weld Structural Adhesive EC-3984 combines the strength and performance of our 3M Scotch-Weld Structural Adhesive Film AF 3109-2 with the convenience and efficiency of a spray for precise coating requirements or to cover larger areas economically and effectively. Our sprayable formula can be used to hold screens or other components in place that need structural adhesive strength at elevated temperatures. Ideal for bonding wire mesh on engine nacelles, thrust reversers, and acoustic panels for aircraft and aircraft engines, this adhesive delivers reliable performance in temperatures up to 300 F (149C). 3M Scotch-Weld Structural Adhesive EC-3984 can be cured at temperatures as low as 225F (107C) and up to up to 350F (177C). This variable cure rate combined with the film's easy handling gives you flexibility to design efficient processes. What Are Epoxy Adhesives? 3M epoxy adhesives are part of the class of adhesives called structural adhesives which also includes polyurethane and acrylic adhesives. Epoxy adhesives are typically formulated with reactive components (Base and Accelerator) that cure when mixed to form a solid plastic material. 3M provides epoxy adhesives in multiple formats to support your processing needs: Two Part In this format the Base and Accelerator are stored separately which enables the adhesive to have a long shelf life even when stored at room temperature. These materials are available in a duo-pak cartridges for use with the 3M™ EPX™ Applicator System, enabling you to simultaneously meter, mix and apply two-part adhesives. For larger scale operations, you can purchase these in bulk. Because these parts are mixed at point of use, you can reduce waste by saving non-mixed unused material for a later job. One Part In this format, 3M does the mixing for you and ship it frozen. You store it in a freezer, then remove and thaw it when you are ready to use it. Adhesive Films In this one-part format, 3M not only do the mixing for you, but also turns it into a film that can be specifically cut to size and placed into your bond line. 3M offer a variety of films in different weights/thickness and supports. These films must be stored frozen. In a two-part epoxy adhesive, once the two parts are mixed in their specified ratio, they begin the curing process and offer a limited working time where the adhesive can be applied and the two surfaces positioned as needed. Similarly, in a one-part adhesive there is a limited out time after which material is thawed during which it must be used. This work life or out time lasts anywhere from a few minutes to 48 hours or longer. In general, epoxy adhesives provide high shear and peel strengths and have good environmental resistance. These adhesives are preferred for their ease of use, mechanical strength and chemical resistance. Depending on the formulation, epoxy adhesives can be flexible or rigid, transparent or opaque, quick setting or slow setting, high flow or low flow, room temperature or elevated temperature cure. Epoxy adhesives are among the strongest adhesives available, making them well-suited for jobs requiring strength and durability. Our Best for Your Best 3M is proud to partner with organizations across the spectrum of aerospace and related industries. Enabling efficiencies, reducing process times and lowering aircraft weight is how 3M executes its never-ending mission to offer best-in-class adhesives, sealants, surface protection products and composite resins that effectively reduce costs on multiple fronts. Professionals across the industry know the numerous advantages of 3M Aerospace. The brand is widely recognized for the highest standards of quality and performance, adding value to the final results. By engineering reliability, longevity and value into all of its products, 3M has a history of saving money by reducing waste, rework and time.

Specifikationer

Liknande produkter

Användningsområden Automotive Exterior Attachment, Automotive Glass Attachment
Färg Svart
Häftämnestyp PSA
Interiör/Exteriör Antenna Housings, Body Side Moldings, CHMSL Brackets, Claddings, Fascia, Pillars, Plåtar, Roof Ditch Moldings, Side Mirrors, Sill Plates, Step Pads, Window Lace Moldings
Totalbredd (metrisk) 9 mm
Varumärken 3M™